30 Gallon Aft Axle Fuel Tank System For Wheelchair Accessible Ford E-Vans

Introducing Transfer Flow’s 30 gallon aft axle fuel tank system for modified 1997 - 2008 Ford E250 and E350 fuel injected gas E-vans. National Mobility Equipment Dealers Association (NMEDA) members who want to purchase the Transfer Flow aft axle fuel tank system must be a Quality Assurance Program (QAP) Structural Modifier, and meet the First Time Buyer Requirements listed on this page.

To maintain a pathway to compliance via FMVSS, and for a proper fit of the Transfer Flow aft axle fuel tank system, the 2004 - 2008 Ford E-van must be equipped with a compliant two inch body raise (available from Nor-Cal Mobility), and a six inch NMEDA approved lowered floor.

For more information about the 30 gallon fuel system for 1997 - 2008 Ford E-vans, contact Transfer Flow at (530) 893-5209.

First Time Buyer Requirements

  • Your company must be a NMEDA QAP Structural Modifier
  • You need to purchase a body raise kit in compliance with NMEDA specifications (available from Nor-Cal Mobility)
  • Must build 6” lowered floor per NMEDA specs
  • A Master Install Kit is required. See below for pricing.
  • Systems are sold in quantities of 2, and can be ordered from Transfer Flow by calling (530) 893-5209.

Gallons

Fuel Type

Years

Part Number

Ship/Weight

Notes

Code

Price

30 gallons

Gas

1997-03

080-01-11958

Truck/141 lb

See purchasing requirements above. New fillneck on driver's side

E, G, I

$1250.00

30 gallons

Gas

2004-08

080-01-13028

Truck/141 lb

See purchasing requirements above. New fillneck on passenger's side

G, I

$1250.00

Description

Part Number

Price

Supplement Kit — Required when installing 30 gallon tank on an E-350 standard van

020-01-12968

$75.17

Extended E-Van Crossmember Kit — Required when installing 30 gallon tank on 2004-06 extended E-Van. This kit available for passenger side fill only.

020-01-12961

$201.10

Extended E-Van Crossmember Kit — Required when installing 30 gallon tank on 1997-03 extended E-Van. This kit available for driver side fill only.

020-01-12734

CALL

Master Install Kit (one time purchase)

020-01-13703

$450.00

CODES
E = A fuel line release tool is needed for 1992-01 model years. Part #070-TO-07065 ($16.21).
G = When installing a 30 gallon fuel tank on an extended van, you must purchase an Extended Van Crossmember Kit, listed below. This kit is required for driver side fill only.
I = When installing a 30 gallon fuel tank on an E-350 standard van, you must purchase a Supplement kit, listed below. This kit will take into account the different frame heights between an E-250 and E-350 van. This kit must be used without option.

Home l About Us l Aftermarket Tanks l OEM Tanks l FREE Catalog l Site Contents l Contact Us

© Transfer Flow, Inc. 2008